Free Phoniex 3 Simulator is included with this transmitter while stocks Last

Overview: 

The new DX7s offers sophisticated programming to meet the demands of even the most experienced aeroplane and helicopter pilots. An easy-to-use rolling selector combined with intuitive software makes setting up models quick and easy. 

The DX7s is telemetry ready, the transmitterʼs screen displaying real-time telemetry including receiver battery voltage, signal quality and flight log data, which includes antenna fades, frame losses, holds (failsafes). External sensors (sold separately) allow rpm, external voltage and temperature to be displayed on screen in real time and alarms can be programmed to warn of low battery, over temperature, exceeded rpm and diminished RF signal strength.
 
The DX7s features a SD card slot allowing data transfer to and from the radio allowing the transfer of single and multiple models as well as firmware updates. This functionality gives the DX7s the opportunity and luxury of model presets, eliminating programming errors, and reducing the time to get new models flying. 

The top switch locations have been changed to improve ergonomics, and the popular roller/selector is conveniently placed on the right side of the radio for easy thumb use for software navigation. Gimbals are quad ballraced for a smooth action and the DX7s is LiPo capable. 

The DX7s features a built-in multi-chemistry charger designed to charge 4-cell NiMH and 2-cell LiPo batteries at a charge rate of 200mAh.

The charge jack on the right side of the transmitter is non-polarity-critical, allowing the use any type of 12-volt supply to charge the battery regardless of connector polarity. 

Aeroplane Specific Software 
• 8 Wing Types: Normal, Dual Aileron, Flaperon,1 Aileron 1 Flap, 1 Aileron 2 Flaps, 2 Aileron 1 Flap,2 Aileron 2 Flaps V-Tail and Elevon 
• 5 Tail Types: Normal, V-Tail, Dual Elevator, Dual Rudder, Dual Rudder/Elevator 
• 3-Position Flaps with Flap Delay and Elevator Compensation 
• Programmable Dual Rates and Expo 
• Programmable Differential 
• 6 Programmable Mixes Helicopter Specific Software 
• 5-Point Throttle Curve
• 5-Point Pitch Curve 
• 5-Point Tail Curve 
• 6 Swash Plate Types 
• 6 Programmable Mixes 

System Software Features 
• 20 Model Memory 
• Telemetry Audio and Vibe Alerts 
• Range Check 
• User Adjustable Control Modes (1-4) 
• Timer – Throttle or Switch Start 
• Servo Monitor 
• Language Select Features 128 x 64 Screen Resolution: Larger viewing area. 

2 Model-Types: Both Airplane and Helicopter programming in one radio system. 

2048 Resolution: Provides 2048 steps of travel for each servo; smooth transition from stick input to servo movement. 

2000mAh Ni-MH AA battery welded pack:
Extended run times; security and durability of heat shrink/welded pack. 

20 Model Memory: Increased data storage space for additional models. 

Data Transfer: Allows for model programming/setup data to be transferred from one radio to
another compatible radio. 
ModelMatch: Prevents wrong model syndrome. DSMX Dualink Technology: Third generation Digital Spread Spectrum Modulation, superior path diversity. 

Included

•8CH AR8000 
•telemetry capable RX: Full range 8CH high-speed, telemetry capable receiver. 
•Mode Selectable (1-4): Allows the user to easily change the radio between modes 1 through to 4 both in software and hardware. 
•Range Check function: Integrated range check function displays flight log data, (Antenna fades, frame losses, and holds). 
•Real Time Telemetry: The radio will display real time monitoring of flightlog date (Antenna fades, 
frame losses, and holds) as well as receiver pack voltage. 
•SD Compatible: Increased model storage via secure digital or multi media card data storage. Allowing for AirWare updates and model preset downloads 
•ServoSync: Synchronised servo movement for CCPM or Dual Elevators. 
•Timer (start on Throttle up): Two options (Up-Timer) and (Down-Timer); programmable to either the trainer switch, or throttle stick. 
•12 Volt switching power supply with international plugs: Convenience and ease of use for charging. 
•Contrast adjustment: Allows for screen contrast adjustment for optimised viewing of the display. 
•Language Select: Allows user to change language displayed on the screen. 
•Low battery voltage warning: Alerts the user with both an audible and visual warning. 
•Digital trims with dual speed trim scroll: Convenience and ease of use. 
•Telemetry warning screen: (Audible/Buzzer) Provides both tone and vibration alerts. 
•Differential: Precise electronic adjustment of aileron travel when flaperon or elevon wing type is active. 
•8 Wing Types: Dual Aileron, V-Tail, and Elevon mixing options available. 
•5 Point Graphic Pitch Curve: Allows for adjustments of the pitch of the main rotor blades on a helicopter to optimise each flight mode. 
•5 Point Graphic Tail Curve: Allows for adjustments of the pitch of the tail rotor blades on a helicopter to optimise each flight mode. 
•4 Programmable Mixes : Allows for custom mixing of two servos. 
•Active gain control: Allows for in-flight adjustments of the gyro gain settings. 
•Flap Delay with elevator compensation: Adjustable control of flap servo speed 
•Programmable Flap System: Allows for elevator and flap positions to be programmed for landing and 
takeoff. 

Items included: 

AR8000 8-Channel DSMX Receiver with Remote Receiver 
4.8V 2000mAh NiMH Transmitter Battery Pack 
SD Card 
12V DC Power Supply 
DX7s Neck Strap 

AR8000 Receiver 

The AR8000 full range 8-channel DSMX™ receiver is compatible with all Spektrum™ radios that support DSM2 
technology and is telemetry capable. 
Note: The AR8000 receiver is not compatible with the Spektrum DX6 parkflyer transmitter. 
Features 
• 8-channel full range receiver 
• Patented MultiLink receiver technology 
• Includes one internal and one remote receiver 
• SmartSafe™ failsafe system 
• QuickConnect™ 
• Flight Log compatible (optional) 
• 2048 Resolution 
• High-speed 11ms operation when used with capable transmitters 
• Hold indicator (Red LED indicates number of holds incurred during flight).