|
HKIII-4035-530 Scorpion Brushless Motor HK3-4035-530
The Scorpion HKIII-4035 motors represent the most technologically advanced power system ever developed for ues in 700-Class electric helicopters. These motors are designed to provide all the power that you can use, while still maintaining excellent efficiency and cool running characteristics. The HKIII-4035-530 motor features a new patented rotor can that provides several benefits. First, it is thicker for more stability at higher speeds, and this also helps to retain more of the magnetic field for higher efficiency. Second, the outer surface of the rotor can features a new spiral rib pattern that increases surface area and helps to move air around the motor for increased cooling and lower operating temperatures.
There are several changes in the new HKIII-4035 Series motors that were made in response to requests from customers over the past couple years. These changes include:
1. Longer shaft to allow for the use of additional support bearings on the other side of the pinion gear.
2. A flat area pre-cut into the shaft for the set-screw on your pinion gear.
3. Larger 4mm threaded mounting holes for more secure mounting.
4. Dual mounting hole pattern with both 25mm and 30mm hole spacings.
In addition to the mechanical changes to these motors, changes in metalurgy in the stator assembly and rotor can have increased the overall efficiency. This allows the motor to handle higher currents while developing more torque and more power that will allow your 700-Class helicopter to perform like never before.
Scorpion HKIII Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold anodized to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are N-50EH style, which are rated for operation at 200 degrees C (392 F), making a motor that is virtually impossible to burn up in normal use.
All Scorpion HKIII-4035 series motors come with 4mm male Bullet style connectors already attached, and include a hardware package that contains 3 matching female Bullet connectors for your speed controller with matching heat shink tubing. For maximum strength, the Scorpion HKIII-4035 series motors feature an 8mm motor shaft that is ground down to a 6mm diameter at the output end to fit standard size pinion gears. Since the HKIII Series motors are primarily designed for Helicopter use, they do not include a prop adapter. If you intend on running a prop on this motor, you will need to purchase a prop adapter for a 6mm shaft.
Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.
The Scorpion Motor Bearing Lubrication Kit is now available for maintaining the bearings in your helicopter motor. To view this product, please check out the Bearing Lubrication Kit.
Please click here for a copy of the Scorpion HKII-4035-530 motor drawing.
For the best overall combination of quality, performance, and value, use Scorpion Motors in your helicopter!
Specifications
Stator Diameter 40 mm (1.56 in)
Stator Thickness 35 mm (1.024 in)
No. of Stator Arms 12
Magnet Poles 10
Motor Wind 9 Turn Delta
Motor Wire 22 - Strand 0.29mm
Motor Kv 530KV RPM / Volt
No-Load Current (IO) 2.15 Amps @ 10v
Motor Resistance (RM) 0.015 Ohms
Max Continuous Current 80 Amps
Max Continuous Power 3400 Watts
Weight 460 Grams (16.22 oz)
Outside Diameter 49.98 mm (1.97 in)
Shaft Diameter 5.98 mm (0.235 in)
Body Length 61.8 mm (2.43 in)
Overall Shaft Length 100.0 mm (3.93 in)
Max Lipo Cell 12s
Peak Current 100A (5 seconds)
Peal Power 4400 Watts (5 seconds)
Motor Timing 5deg
Drive Frequency 8kHz
Weight including packaging
607g
|
