This is a time limited special offer for the E7/E6 kit along with a 700 class motor.

You can choose between the following 

HK3-4035-450KV
HK3-4035-500KV
HK3-4035-530KV
700MX - 510KV
700MX - 530KV


Please specify which motor you require at the time of the order. The HK3-4035-450KV is the recommended motor with the kit, other motors may require a pinon change.

Postage on this kit is Free.


PDF Manual avaliable here


The long awaited Synergy E7 is finally here! The Synergy E7 is an ultra light, ultra rigid, 700 class helicopter which was designed with high efficiency and long flight times in mind. That’s right, low weight means longer flight times! With ultra low weight, your disk loading is low which means your motor works less, your servos work less, and your entire helicopter is happy!

The 116T Machined Helical Main gear is whisper quiet and efficiently transfers power from the motor to the rotor disk. This machined main gear has been thoroughly tested to withstand the extreme power of today’s electric systems. The pinion to main gear mesh is fully adjustable with four different gear ratios to choose from. Pinions included in the kit are 14 and 15 tooth pinions. Optional pinions are 12 and 13T.

Synergy believe in letting modelers be modelers, you can configure the E7 how you want to, not how a pro pilot, a designer, or an owner of the company thinks it should be done. You are in complete control. Use this power wisely!

That’s not all! When you purchase the E7, you also get everything you need to configure this model as a 600 class model. This includes, extra belt, boom, tail push rod, boom supports, as well as blade bolts and blade bolt adapters! That’s right! You get to choose your own adventure and build what you like! When configured as a 10S E6, your total flying weight will still be right along side all of the other 600 class electrics on the market today

This is your next 600 size electric helicopter! Designed by Matt Botos who was one of the first professional pilots in the USA to utilize flybarless technology with electric helicopters. Matt’s knowledge and expertise were poured into the E6 design with absolutely no exceptions in quality and performance. The E6 is light and agile while maintaining a rugged frame structure to handle that unfortunate impact with the dirt. The E6 has the presence in the air of a 700 size helicopter in an ultra efficient 600 size package.

Precision Machined Helical Main Gear-

Smooth running Mod 1 custom machined helical gear is stealthy silent and provides plenty of  girth for todays high powered electric motors. Settling for a molded main gear on a high powered electric was just not an option.

Third Bearing Block Main Shaft Support-

The main shaft has third bearing block support to ensure proper gear mesh and eliminate frame flexing during hard 3D maneuvers.

Motor Shaft Pinion Support-

The E6 pinion is supported by a lower bearing block which also ensures a proper gear mesh.

Carbon Servo Arms-

Custom carbon servo arms for the ultimate precision in flight.

Features:

Precision machined helical main gear
Third bearing block support for main shaft
Bearing block support for motor pinion
Multiple battery configuration options (8s, 10s, 12s)
Flybarless head designed specially for ALL of todays FBL Electronics
Extremely light and Ultra rigid carbon fiber frame design for those serious competition pilots
Motor mount handles 30mm mounting patterns
Motors up to 60mm in diameter accepted between frames
Accepts rotor blades 600-630mm or 690-710 depending on E6 or E7 build.
Carbon servo arms provide for a much better precision feel in flight
Pinions included!