Aileron Carbon Fiber Linkage Rod Set H70068T

●Use for T-REX 700E.

●700E Linkage x 4(2x110mm)
●700E Aileron Control rod Carbon Fiber Shaft x 8(4x5.4x6.5mm)
●700E Aileron Control rod Carbon Fiber Tube x 4(2.2x3.9x96mm)
●700N Ball Link x 8(5x20.5mm)

Instructions

1.Mix thoroughly suitable amount of epoxy.

2.Apply generous amount of epoxy on the tips of carbon tube after sliding over the linkage rod.
(Note: for quick drying epoxy, work fast as it must be applied prior to curing)


3.Slide the carbon end caps on both sides of the carbon tube.

4.Thread the ball links onto the linkage rod until the base to base length is 97.5mm.

5.If gap exists between the ball link and end caps after correct length has been achieved, slide the end caps outwards to cover the gaps (note: must be done before epoxy cures)

6.Wipe away excess epoxy and set it aside to cure.

7.Pop the finished link back between aileron servo horn and bell crank.

SKU: H70068T
Reward Points You will earn 2 Points for writing a review and 2 Points for rating this product.
Sign up to get notified when this product is back in stock
Reward Points You will earn 3 Points for purchasing this product.
Availability: Out of Stock
£6.74

Product Description

Details

●Use for T-REX 700E.

●700E Linkage x 4(2x110mm)
●700E Aileron Control rod Carbon Fiber Shaft x 8(4x5.4x6.5mm)
●700E Aileron Control rod Carbon Fiber Tube x 4(2.2x3.9x96mm)
●700N Ball Link x 8(5x20.5mm)

Instructions

1.Mix thoroughly suitable amount of epoxy.

2.Apply generous amount of epoxy on the tips of carbon tube after sliding over the linkage rod.
(Note: for quick drying epoxy, work fast as it must be applied prior to curing)

3.Slide the carbon end caps on both sides of the carbon tube.

4.Thread the ball links onto the linkage rod until the base to base length is 97.5mm.

5.If gap exists between the ball link and end caps after correct length has been achieved, slide the end caps outwards to cover the gaps (note: must be done before epoxy cures)

6.Wipe away excess epoxy and set it aside to cure.

7.Pop the finished link back between aileron servo horn and bell crank.

Additional Information

Additional Information

Product Code H70068T
Barcode 4713413956036
Manufacturer Align
Build Level N/A
Class Type N/A
Fuel Type N/A
Surface Type N/A
Vehicle Type N/A

Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register