Please note this is a pre order and is estimated to arrive on 10th May
The Futaba GY760R contains an extremely precise 3-axis heading hold gyro, a (T-FHSS/FASSTest) receiver and head speed governor for use in high performance RC helicopters. As an all in one unit, the GY760R is easy to install, and keeps wiring to a minimum. This allows a neater installation, whilst the simplicity and reduction in part count reduces the possibility of errors or failures. The GY760R is programmed using the dedicated GPB-1 programming unit either by connecting it directly to the programming port or alternatively connecting it to the trainer port on your transmitter to enable an assistant to make changes wirelessly as you fly, dramatically reducing the time it takes to fine tune your model. andbull; Combined receiver, governor and 3-axis heading hold gyro andbull; Easy to install and simple to connect andbull; Compact and light weight package andbull; The case is made from aluminium with a high quality anodic oxidation coating finish andbull; Screw holes in the base of the unit allow simple and secure installation andbull; To take advantage of the free firmware updates a CIU-2 or CIU-3 is required (sold separately) Gyro Section andbull; Advanced and adaptive PID control loop (as used in the CGY750 V2.0) andbull; The GY760R can be installed in various orientations as required Rudder (Yaw) andbull; Suited to both Digital (1520uSec / 760uSec) and Analogue (1520uSec) servos andbull; 3D and Sports modes available Aileron (Roll) andamp; Elevator (Pitch) andbull; F3C and 3D modes available andbull; Supports H3-90 / H3-120 / H3-140 / H4-00 / H4-45 swashplate types andbull; Suited to both Digital (1520uSec) and Analogue (1520uSec) servos (* 760uSec digital will be enabled in the future) Head Speed Governor andbull; Advanced and adaptive PID control loop (as used in the CGY750) andbull; Capable of governing head speeds from 700 to 4,000 rpm andbull; Suited to both Digital (1520uSec) and Analogue (1520uSec) servos andbull; Governor or Revolution limiting modes available andbull; Cutting edge control algorithm provides more consistent RPM governing andbull; Revolution sensor is compatible with the GV-1 and CGY750. The CGY760R also supports an optional back plate revolution sensor andbull; RPM data can be sent back to the transmitter as a telemetry function Receiver Section andbull; FASSTest (18ch or 12ch mode) and T-FHSS Air transmission modes can be used (selectable using GPB-1) andbull; Diversity aerial (2 aerials are installed for improved signal security) andbull; Telemetry functions (Battery voltage, S.BUS sensor connected to S.BUS2 port and RPM data) GPB-1 Program Box The GBP-1 is the programming box for CGY760R. It can be connected to the dedicated port on CGY760R, allowing you to check and change the settings at the press of a button. andbull; 128x64px LCD screen with backlight andbull; 4 Push keys and a beeper for easy operation andbull; Power is provided from CGY760R so no extra battery is needed. andbull; You can wirelessly adjust some settings through the trainer function of the transmitter, connected this to GPB-1 using a dedicated cable. | |||||||||||||||||||||||||||||||||||
|
LiPo | No |
---|---|
Pre Order | No |
Bundle Avaliable | No |
Product Code | P-GY760R-GBP1 |
Discontinued | No |
EAN / Barcode | 4513886030802 |
Brand | Futaba |
Weight | 0.200000 |
Write Your Own Review
Customer Questions
More from Futaba
- Upper/Bottom Servo Case Set BLS251/BLS256HV FUTEBS3346Special Price £7.64 £6.37 Regular Price £8.50
- Servo Gear Set - S3154/3114 FUTEBS3320Special Price £2.69 £2.24 Regular Price £2.99
- Throttle Spring Set 10PX FUTEBT3373Special Price £6.76 £5.63 Regular Price £7.50
- Servo Gear Set - S9257 FUTEBS3332Special Price £7.64 £6.37 Regular Price £8.50
- FDLS-1 Dual-Rx Link System FUT05102696-1Special Price £49.50 £41.25 Regular Price £55.00