HK5035-8MM-Motor Shaft Kit HK5035-8MM-MOTORSHAFTKIT (HK5035-8MM-Motor Shaft Kit)

Only 1 left
In stock
Product Code
HK5035-8MM-Motor Shaft Kit
£34.99
Quick Overview

The shaft for the HK-5035-500KV motors measures 10mm in diameter, and is 100.75mm in long. The pinion end of this shaft is ground down to 8mm to allow the user to install 8mm pinion gears. The shaft kit will also fit other brushless motors that require a 10mm shaft of this length. The shafts can be cut shorter with a Dremel tool and a cut-off wheel if necessary to fit other motors. 

Note: The shafts in the Scorpion motors are a slight press fit into the aluminum front housing. The shafts will not just slide out when the setscrews are removed. They need to be pressed out in a bearing press, or in a drill press, with the front housing of the motor supported in a block of wood to prevent warping the front housing. 

Weight including packaging: 

62g

Secured and trusted checkout with

The shaft for the HK-5035-500KV motors measures 10mm in diameter, and is 100.75mm in long. The pinion end of this shaft is ground down to 8mm to allow the user to install 8mm pinion gears. The shaft kit will also fit other brushless motors that require a 10mm shaft of this length. The shafts can be cut shorter with a Dremel tool and a cut-off wheel if necessary to fit other motors. 

Note: The shafts in the Scorpion motors are a slight press fit into the aluminum front housing. The shafts will not just slide out when the setscrews are removed. They need to be pressed out in a bearing press, or in a drill press, with the front housing of the motor supported in a block of wood to prevent warping the front housing. 

Weight including packaging: 

62g

More Information
Product CodeHK5035-8MM-Motor Shaft Kit
Weight0.0300
Barcode40440
0
Rating:
% of 100
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account