Align T-REX 470LP KIT RH47E03X

Rating:
100% of 100
Only 2 left
In stock
Product Code
RH47E03XT
Special Price £175.49 Regular Price £194.99
Quick Overview

Spare PartsUser Manual

Please See Below for More Details

Secured and trusted checkout with

Spare PartsUser Manual

Following the release of the T-REX 450L, which introduced an innovative design and came equipped with high-end electronic equipment. Align's most anticipated helicopter release in 2016 the T-REX 470L is born. No matter whether you are a newcomer or a professional, the brand new T-REX 470L will give you the new flying feel again.

470EFL Main Rotor Head provides superior flight stability and offers a lower CG design to reduce flying resistance while providing a more rigid and fast rotor head response. To improve the strength and durability of the main and feathering shaft the 470 main shaft outer dimension was increased from Ø5mm to Ø6mm, while the feathering shaft outer dimension was increased from Ø4mm to Ø5mm. The 470L has adopt a high standard 1.2mm 3K carbon fiber main frame and a wider body design which increases the size of the battery compartment allowing the use of larger capacity battery. The 470L utilizes a high efficient belt drive assembly design with an innovative adjustable belt guide pulley, providing a convenient way to adjust the belt tension by releasing or tightening the screw. This screw is used to maintain optimal belt tension improving the life of the belt and lowering maintains costs. The landing skid is tilted 5 degrees forward to improve crashworthiness and makes T-REX470L more avant-garde and dynamic.

The T-REX 470L is equipped with the large outer diameter 470MX motor (1800KV) which is highly efficient providing superior power, excellent torque, improved current draw, and a lower operating temperature which are excellent improvements as compared to the 460MX motor. The new RCE-BL50X brushless ESC with an internal BEC provides 5.0V to 8.4V which can be set based on servo specification. The new high-end electronics effectively enhance flight performance.

  • Extended 380mm main blades effectively improve the flying stability and power performance. The new engineered airfoil design effectively reduces turbulence at the end of the main blades,this saves power consumption during extreme 3D flight. New 69 size tail blades are longer in length and offer superior tail holding performance, even during demanding 3D flight.
  • Brand New 470EFL Main Rotor Head provides superior flight stability and offers a lower CG design to reduce flying resistance while providing a more rigid and fast rotor head response. Brand New 470 Main Shaft and Feathering Shaft: Main Shaft outer dimension increased from Ø5mm to Ø6mm, while the Feathering Shaft outer dimension increased from Ø4mm to Ø5mm,effectively strengthening the Main and Feathering Shaft while improving durability.
  • New 470MX motor features; high efficiency, superior power, excellent torque, low current draw, and a low operating temperature. The 470MX is capable of maintaining consistent torque and head speed through continuous 3D maneuvers. 470MX motor is designed for 3D flight.
  • New Swashplate design with zero slop delivering a precise and accurate controlled flight.
  • Manufactured using the latest composite technology to embed brass inserts into main shaft bearing block, which enhance the structure integrety and strength. You can feel the solid structure even in extreme 3D flight.
  • Carbon fiber side frame plates are manufactured using a proprietary composite material integration technology which integrates the battery mounting rails into the frame. This unique use of open spaces within the frame creates a rigid frame and is aesthetically pleasing.
  • An additional 3rd main shaft bearing block increases the strength of the main frame while improving 3D flight.
  • Brand new latching battery tray which utilizes integrated mounting rails inside the frames to simplify insertion / removal of battery while providing protection for the battery.
  • Specially designed for T-REX 470 providing higher currency output and support for high voltage servos with an internal BEC output from 5V to 8.4V which can be set up based on servo specification.
  • DS350M HV Cyclic and DS455 HV Rudder servos support up to 8.4V for superior responsiveness, extreme torque, and improved performance.
  • Innovative adjustable belt guide pulley, allows a convenient way to adjust the belt tension by releasing or tightening the screw. The screw is used to maintain optimal belt tension over time.
  • The One Way Bearing is manufactured using bearing steal and after heat treatment the hardness is HRC50-55. This larger bearing has a higher load carry capacity which reduces the loss of momentum and improves the fficiency, speed, and smoothness of the main rotor. The new main gear case and all-metal central pulley transmission system is an efficient design to deliver the ultimate performance.
  • Landing skid is tilted 5 degrees forward to improve crashworthiness.
  • Newly designed vertical tail servo mount to improve CG while increasing the responsiveness of 3D flight.
  • A wider Tail Boom to improves the torsional strength.
  • Designed using a proprietary material integration technology which creates a unique look and improves the Vertical Stabilizer's stiffness.
  • The newly designed dual point supported tail control assembly delivers slop free performance while improving rudder resolution and precision.
  • The new tail rotor holder design includes thrust bearings which increases durability, as well as significantly improving the accuracy and efficiency of the tail performance when using 69 size Tail Blades.

Standard equipment

●RCE-BL50X 50A Brushless ESC x 1
●470MX Brushless Motor(1800KV) x 1

 

Specification

●Length: 755mm
●Height: 210mm
●Width: 108mm
●Main Blade Length: 380mm
●Main Rotor Diameter: 850mm
●Tail Rotor Diameter: 181mm
●Motor Pinion Gear: 11T
●Main Drive Gear: 121T
●Main Drive Pulley: 56T
●Tail Drive Gear: 15T
●Drive Gear Ratio: 11:1:3.73
●Weight(w/o battery): 840g

●T-REX 470L DOMINATOR Set x 1
●380 Carbon Fiber Blades x 1set
●69 Tail Blade x 1set
●470MX Brushless Motor(1800KV) x 1
●RCE-BL50X 50A Brushless ESC x 1


Radio transmitter and electronic equipment required for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge or Digital Pitch Gauge
4.6S Li-Po 1400~1900mAh battery x 1
5.Flybarless System x 1
6.CCPM Servo x 3
7.Tail Servo x 1

Note: T-REX 470LP KIT rudder servo must choose the stall torque greater than 2kg.cm(6.0V) and the motion speed smaller than 0.05sec/60°(6.0V). Too small torque or too slow servo will affect the tail authority.

#

In The Box

  • T-REX 470LP KIT
  • 380mm Carbon blades X 1 set
  • 69mm Tail Blade x 1 Set
  • RCE-BL50X 50A Brushless ESC X1
  • 470MX Motor 1800KV

Needed to Complete

  • Any Compatable Reciver For Your Radio
  • Flybarless Unit
  • x3 Mini Cyclic Servos
  • x1 Mini Tail Servo
  • 6s 1450-1850mAh
  • 6 Channel Radio
More Information
Product CodeRH47E03XT
Weight5.0000
Barcode4713413998302
Build LevelKit (Unassembled)
Class Type450 Class
Fuel TypeElectric - Brushless
5
Rating:
100% of 100
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account