Please Note Canopy Colour is Subject to Change by Manufacturer
XLPower Specter 700 is an excellent offering, blending extreme high performance, low parts count, and great value! The Specter 700 features a high CG design, aided by mounting all electronics as high in the frame as possible. Additionally, the main rotor is located as low as possible to the tail boom further enhancing the CG design.
The main rotor head features a CNC polymer and O-Ring based dampening system, which provides both great low headspeed characteristics, as well as incredibly crisp feeling in high headspeed flight. The main shaft is 15mm thick, offering improved crash resistance and strength over most other 700s in the market. Blade grip pitch arms feature two mounting holes (inner and outer), allowing pilots to tune their rotor heads for incredibly aggressive pitch and cyclic response, or more conventional and calmer reactions.
Additionally the helicopter features titanium based turnbuckles, which provides incredibly precise length adjustments.
The tail rotor is driven by a belt, providing pilots with simplicity of both design and low parts count. Often times belts are desired due to improved durability; in the event of a tail strike often times the belt will skip a few teeth, and keep on running without damage to the drive train.
Battery mounting is a breeze thanks to the sliding rail system. Secured in the front by a single thumb-screw with O-Ring, batteries can be changed in a matter of seconds! There is a large area of space available for CG adjustment (front to back adjustments), or larger battery packs such as 5,500 mAh 12s, or even 5000mAh 14s power systems!
Overall, the Specter 700 weighs in between 11 and 12 pounds depending on electronic choices, making this heli one of the lightest on the market.
Main blade size: 685mm - 716mm
Tail blade size: 105mm - 115mm
Motor pinion: 11t included; 10t,12t optional
Main gear: 106t
Tail pinion: 17t
Autorotation gear: 80t
Main to tail gear ratio: 4.7
RTF weight: 4900g - 5300g
Main shaft diameter: 15mm
Feathering shaft diameter: 10mm
Tail boom diamater: 27mm
Battery tray size: 350mm x 66mm x 70mm (12s-14s)
- (1) XLPower Specter 700 Kit
- (3) 25T Aluminum Servo Horns
- (1) Foam Blade Holder
- RotorTech Blades ( Unless option is used to remove Blades )
Needed to Complete:
- Transmitter (7-channel or more, helicopter system)
- Receiver (7-channel or more)
- (2) 6S Li-Po 4500 ~ 5200mAh
- Digital Pitch Gauge
- (3) Full Size Cyclic Servos
- (1) Full Size Tail Servo
- (1) Brushless Motor (4525 or similar recommended)
- (1) 12s ESC (130A Minimum Recommended)
- (1) Set of 690-710mm Rotor Blades
- (1) Set of 105-115mm Tail Rotor Blades
- Misc. Building Equipment
|EAN / Barcode||XL70K02|
|Fuel Type||No Motor Supplied|
|Scale | Model Type||700 Class|
|Build Level||Kit Unassembled|