Axial AX24 XC-1 4WS Brushed 4WD 1/24 RTR RC Crawler - Green - AXI00003T1

Description

A pint-sized 1/24 scale crawler built just as much for tight indoor courses as for outdoor trails, using a durable side-plate chassis with angled rock sliders that add real clearance and articulation on obstacles.

The AX24's headline feature is its genuinely useful four-wheel-steering system — a rarity even among larger, more expensive crawlers. Three transmitter-selectable modes give drivers front-only steering for normal driving, mirrored rear steering for tighter turns on obstacles, or full crab-crawl mode for sliding sideways past tricky ledges. It's a level of control most micro crawlers simply don't offer, and it makes a real difference threading the AX24 through gates and technical lines that would stop a two-wheel-steer rig dead.

Long-travel 51mm coilover shocks and a 4-link front/rear suspension keep the tyres planted, while front and rear lockers with a worm-gear setup add extra ground clearance when it's needed most. Splined, sleeved drive shafts allow for maximum suspension travel without binding, and steel axles, stub axles and dogbones throughout keep the drivetrain durable despite the small scale. LED rock lights mounted in the sliders mean the fun doesn't have to stop when the sun goes down.

Key Features

• Three genuinely useful 4-wheel steering (4WS) modes — front only, mirrored rear, or crab-crawl
• Durable side-plate chassis with angled rock sliders for improved obstacle clearance
• LED rock lights mounted in the sliders for confident low-light crawling
• Long-travel 51mm coilover shocks to maximise traction over uneven ground
• 4-link front and rear suspension to reduce axle steer and torque twist
• Front and rear lockers with a worm-gear setup for extra ground clearance
• Steel front and rear axles, stub axles and dogbones for real strength
• Splined, sleeved drive shafts for maximum suspension travel
• Hinged body system for quick access to on-board components
• 1.0in Rockster wheels with 2.44in Rock Lizards tyres — a nod to the original 2007 AX10
• Sealed ball bearings throughout — no bushings anywhere on the drivetrain

Specification

• Scale: 1/24
• Build Level: Assembled (RTR)
• Power Source: Electric — brushed
• Drivetrain: 4WD with 4-wheel steering
• Wheelbase: 5.3in (135mm)
• Length: 7.8in (198mm)
• Width: 4.5in (114mm)
• Height: 3.7in (94mm)
• Ground Clearance: 1.3in (34mm)
• Motor: Dynamite 88T brushed
• Differential: Worm gear 16T/4T with lockers
• Pinion/Spur: 11T/55T

What's Included

• Axial AX24 XC-1 1/24 scale 4WS RTR rock crawler
• Spektrum SLT3 2.4GHz 3-channel radio system
• 2x Axial AS-1 servo
• Spektrum 2-in-1 ESC/receiver combo
• 0.5A USB charger
• Dynamite 88T brushed electric motor
• Dynamite 350mAh 2S 7.4V LiPo battery
• 4x AA transmitter batteries
• Product manual
• Miscellaneous tools

Required to Complete

Nothing — everything required to start driving is included in the box.