Element RC Enduro Trailwalker 1/10 RC Trail Truck RTR - EL40131

This portal-axle trail truck borrows the same high-clearance driveline as Element RC's other Enduro crawlers but wraps it in the Trailwalker's own retro-styled body and bronze beadlock wheels. It comes mostly ready to run, needing only a battery, charger and the usual radio batteries before its first outing. The 4WD setup and portal axles make it more of a technical crawler than a fast basher.

About the Element RC Enduro Trailwalker

The Enduro Trailwalker is Element RC's 1/10 scale, 4WD trail truck, built on the Enduro platform's portal-axle chassis and finished with a pre-painted, retro-styled polycarbonate body and accessories.

High-clearance portal axles use metal gears throughout the portal boxes and give roughly an inch more ground clearance than the standard straight-axle Enduro trucks, while behind-the-axle steering with aluminium steering plates improves the approach angle over obstacles. An adjustable rear drive ratio transmission and an integrated servo winch mount let the setup be tuned or extended for tougher trails, and threaded, fluid-filled aluminium shock bodies handle the damping.

Power comes from a Reedy Power 14-turn 5-slot brushed crawler motor through a water-resistant RX-21 2-in-1 ESC/receiver, controlled with a 4-channel 2.4GHz radio and Reedy Power high-torque metal gear servo. It's built for low-speed, technical crawling rather than pace, riding on licensed General Grabber X3 tyres and bronze Ocho beadlock wheels, so it suits someone who enjoys picking a line over rocks more than open bashing space; a battery and charger both need to be bought separately.

Key Features

• High-clearance portal axles with metal gears throughout — extra ground clearance and durability under load
• Behind-the-axle steering with aluminium steering plates — better approach angle over obstacles
• Integrated servo winch mount — ready to add a winch without extra bracketry
• Adjustable rear drive ratio transmission — tune the gearing to the trail
• Threaded, fluid-filled aluminium shock bodies — consistent damping on rough ground
• Licensed General Grabber X3 tyres on bronze Ocho beadlock wheels — scale looks with real grip
• Retro 70s-80s inspired styling — a different look from Element RC's other Enduro trucks

Specifications

• Scale: 1/10
• Drive system: 4WD
• Power source: Electric
• Terrain: Off-road
• Length: 462mm
• Width: 260mm
• Wheelbase: 313mm
• Motor: Reedy Power, 14-turn 5-slot brushed crawler
• ESC/Receiver: RX-21 2-in-1, water-resistant
• Servo: Reedy Power high-torque metal gear
• Radio: 4-channel 2.4GHz
• Wheels: Bronze Ocho beadlock
• Tyres: Licensed General Grabber X3

What's In The Box

• Fully assembled Enduro Trailwalker with pre-assembled portal-axle chassis
• Reedy Power 14-turn 5-slot brushed crawler motor (installed)
• RX-21 2-in-1 ESC/receiver, water-resistant
• 4-channel 2.4GHz radio transmitter
• Reedy Power high-torque metal gear servo
• Pre-painted polycarbonate Trailwalker body with accessories

What You Need To Complete

• Battery (not included)
• Battery charger (not included)