This is the Mantis Slim 80A brushless speed controller it is a small but incredibly powerful ESC which boasts small dimensions and a powerful BEC. It can be programmed from the optional Air programming card or your transmitter and boasts burst current capacity of up to 100 amps.
The integrated switching BEC provides a 5.5V output at up to 8 amps for your receiver and servos.
The Mantis Slim series of controllers are based on the existing Mantis range of speed controllers. All are highly customisable through their programming options – for example the LVC can be set and also the motor acceleration, great for geared setups where a softer startup is normally required.
Specifications
* LiPo:2-6
* Max. continuous current:80amp
* Dimensions:60 x 29 x 14.5mm
* Weight:57.0g
* Continuous BEC Current:8.0A
* Max BEC Current:8.0A
* BEC Type:Switching BEC
Default settings for the Mantis Slim as follows: -
* Brake: Off
* Battery type: LiPo with automatic cell count detection
* Low voltage Cutoff: Medium (3.0V/60%)
* Timing Setup: Automatic
* Acceleration: Soft acceleration
* Heli Mode: RPM OFF
* Motor Rotation: Forward
* Frequency: 8kHz
* Low Voltage Cutoff type: Reduce power
| Product Code | ZTW2080271 |
|---|---|
| Bundle Avaliable | No |
| LiPo | No |
| Pre Order | No |
| Discontinued | No |
| EAN / Barcode | 5051121248098 |
| Brand | Ztw |
| Weight | 0.084000 |
| Product Type | Electric Speed Controllers |
| Power Rating | 41 - 80 Amps |
