Associated RC8B4.1E Team Kit 1/8 Electric Buggy AS80950

The latest iteration of the RC8B4 eBuggy is here, representing the next evolution in high-performance remote-controlled buggies. Team Associated's engineers were determined to enhance the buggy's performance on un-groomed outdoor tracks by lowering the center of gravity (CG), reducing weight, and refining handling. The centerpiece of this innovation is the RWB/FWB adjustable weight bias chassis design, allowing drivers to choose between configurations for more rear traction or increased steering.

The suspension system has undergone a comprehensive redesign, featuring new low-CG shock towers, shorter shocks, and 3-hole rear suspension arms. These modifications enable softer shock and spring settings while maintaining stability in high-speed turns. Additionally, the wide base rear hubs offer multiple fixed axle heights, supported by 3mm carbon fiber hub towers, providing flexibility in geometry adjustments.

The Enduro12 Trail Truck is equipped with 92mm universal joints, 44/13 bevel gears, and a 46T molded spur gear to ensure optimal grip and smooth power delivery on un-groomed outdoor tracks.

Key Features:

• RWB/FWB Adjustable Weight Bias Chassis Design: Fine-tune rear grip versus steering according to your preferences.

• Low CG Aluminum Shock Towers: Enhance stability and reduce weight.

• Shorter 16mm Shocks: Lower the center of gravity and reduce overall weight.

• New Machined Shock Pistons: 6-hole 1.4mm front and 1.5mm taper rear pistons with emulsion shock cap seals.

• 3-Hole Rear Suspension Arms: Updated geometry for both smooth and bumpy tracks.

• Blue Aluminum Front Upper Arm Mount: Improved durability.

• Molded RC8B4.1 Front Bumper: Optimized profile for bumpy transitions.

• Optimized Drivetrain Components: 92mm universal driveshafts, 44/13 bevel gears, and a 46T molded spur gear.

Legacy Features:

• Centralized Drivetrain Configuration: Optimized for shorty-style batteries only.

• Adjustable Battery Trays: Two included with adjustable stops for battery position adjustment.

• ESC Tray with Protective Shield: Unique position for various battery setups.

• Receiver Box with Built-in Servo Mounts: Integrated cable routing and increased volume for taller antenna-less receivers.

• Innovative Pivot Ball Front Suspension Geometry: Improves steering balance and handling predictability.

• Durable Gearboxes: Utilize the latest hard material, offering efficiency and reduced vibration.

• Two-Piece Clamping Motor Mount: Shiftable to support FWB or RWB configurations.

• Efficient Steering System: Top-mounted steering rack for extra clearance around the gearbox assembly.

• Advanced Suspension Components: Soft Blend suspension arms, +1 aluminum steering block arms, and more.

• Rear Chassis Brace: Features design options for flex tuning.

• Flexible Rear Body Post: Includes a rubber grommet for added flexibility.

• Improved Rod Ends: Enhanced thread engagement and easy turnbuckle wrench access.

Power and Dimensions:

• Electric Power Source: Delivers a perfect blend of performance and efficiency.

• Length: 486mm (19.13in) for balanced maneuverability.

• Width: 304.5mm (11.99in) for versatility on various terrains.

• Wheelbase: Varies for stability and adaptability.

• Weight: Varies for optimum handling.

• Internal Gear Ratio: 3.38:1 for efficient power transfer.

• 4WD Drive: Provides exceptional control and traction.

Required to Complete:

• 1:8 Scale Sized Electric RC Car Motor: Reedy Power Sonic 866 Buggy Motors recommended.

• 1:8 Scale Sized Electronic Speed Control (ESC): Reedy Power Blackbox 850R Sensored ESC or #27008 with Programmer 2 suggested.

• 2- or 3-Channel Radio/Transmitter: For precise control.

• Batteries for Radio-Controlled Car Radio: Ensure uninterrupted operation.

• 2S Shorty LiPo Battery Pack (2 Needed): Zappers SG5 7.6V 6400mAh Shorty LiPo or Zappers DR 7.6V 6100mAh Shorty LiPo recommended.

• 4S LiPo Shorty Battery Pack (1 Needed): Zapper SG5 15.2V 6300mAh Shorty LiPo or Zapper SG4 15.2V 6100mAh Shorty LiPo suggested.

• 1:8 Scale Buggy Tires and Wheels: For optimal performance.

• CA (Cyanoacrylic) Glue: For secure assembly.

• Polycarbonate-Specific Spray Paint or Bottled Paint and Airbrush: For customization.

• Thread-Locking Compound: To secure threaded components.

• Needle-Nose Pliers, Hobby Knife, Reamer (or Hole Punch): For assembly.

• Ride Height Gauge: For precise adjustments.

• Steering Servo: RT5012A HV Digital Competition 1:8 Servo recommended.

Other Helpful Items:

• Silicone Shock Fluid and Diff Fluid: For smooth operation.

• Body Scissors: FT Body Scissors recommended.

• Shock Pliers: Recommended for shock maintenance.

• FT Hex Wrenches and Nut Drivers: For efficient assembly.

• Wire Cutters: For clean wiring.

• Calipers or Precision Ruler: For precise measurements.

• Turnbuckle Wrench: Recommended for turnbuckle adjustments.