how to bind an frsky transmitter with a vbar reciever ?

Name: AT Models
Address: 891 Plymouth Road, Slough Trading Estate, Slough, Berkshire, SL1 4LP, United Kingdom
Telephone: 01753 694171
Price range: Competitive

To bind an FrSky transmitter with a VBar receiver, follow these general steps:

Turn off both the transmitter and receiver.
Connect the VBar receiver to power using a battery or ESC with BEC.
Put the VBar receiver into binding mode by holding down the small button on the side of the receiver and then powering it on. The LED on the receiver should start flashing rapidly.
Turn on your FrSky transmitter and go to the BIND mode menu.
Select D16 mode for the receiver and put the transmitter into binding mode.
Once the receiver is bound, the LED on the receiver should stop flashing and turn solid.
Disconnect the power from the receiver and turn off the transmitter.
Reconnect the power to the receiver, and it should now be bound to the transmitter.
Test the connection by moving the sticks and checking that the receiver is responding correctly.

Note: The specific steps and procedures may vary depending on the particular model of FrSky transmitter and VBar receiver being used. Always refer to the user manuals for the specific devices you are working with.