47.5g Hyperion P-1913-08 3mm Shaft 1630kv

The P-1913 motors from Hyperion are designed to fit straight into models that use a speed 400. The P-1913 can diameter is smaller than most other outrunners (& speed 400's) on the market - this means that if you can fit a traditional speed 400 can motor into your model, then one of these will fit easily in it's place.

These motors may seem small, but they pack an incredible punch for their size! If you rotate the motor by hand they have a very pronounced cogging effect - this gives you an idea of the power to come.

Suggested Prop & Cell combinations:
* P-1913-08
* 2 cell Lipo:
* APC 7x5E, 9.8A, 9450RPM, 68.6W
* APC 9x4.5E, 16.5A, 8100RPM, 115.5W

* 3 cell Lipo:
* APC 6x4E, 9.3A, 15030RPM, 98W
* APC 7x5E, 18.3A, 12720RPM, 192W

Specifications:
* Max Continuous Current: 8-12A
* Peak Current: 16A
* KV: 1630rpm/V
* Weight: 47.5g
* Outside Diameter: 23.65mm
* Length: 26.8mm

NOTE: As with all brushless motor setups we recommend that you use this data as a starting point only & that you measure the current being drawn yourself. These prop selections should be used as a guide only - other props can also be used.