The 1/10 scale Axial® SCX10™ III Jeep® JT Gladiator 4WD RTR marks the next step forward in ready-to-run, scale off-road action. While continuing to incorporate key components that have made SCX10™ vehicles successful, the SCX10™ III chassis increases realism with details that include a replica V8 engine to house the front-mounted 540 brushed motor, mated to a realistic transmission housing and transfer case like a 1:1 vehicle. The Spektrum™ DX3™ 3-channel 2.4GHz DSMR® transmitter and Firma™ 40A ESC/receiver are also ready to give you the advantages of innovative Spektrum™ Smart technology.
Features
Replica V8 engine cover, transmission housing and transfer case cover and protect the motor while improving scale appearance and adding forward-mounted weight.
DIG function transmission option lets you lock the rear axle from the transmitter for front wheel drive and a tighter turning radius.
Two-speed transmission option (some assembly required) allows you to increase vehicle speed by approximately 40%.
Drivers can choose between the DIG and 2-speed transmission options, or run both with a 4-channel transmitter and two servos (not included).
AR45 Portal Axles feature an offset front housing for realistic looks.
Axle housings also use portal gears for increased ground clearance and a universal that provides 45 degrees of steering.
Differential locker features Hypoid gears, allowing for smaller size gears, improved gear reduction and reduced torque twist.
Authentic Jeep® JT Gladiator body includes over 20 injection-molded parts including bed rack, door handles, mirrors, hood vents and more.
Three-piece body provides a more realistic deep bed.
New centered battery position improves chassis balance with front-mounted motor.
Chassis side pods offer mounting locations for smaller LiPo batteries, if desired.
Hard anodized oil-filled shocks feature shock cap with bleed screw for easier rebuilds.
All drive train components in the transmission, portals and axle gears are metal for extreme durability — with pinion gear included, the vehicle has 23 metal gears in total.
Improved materials increase durability and stiffness while holding tighter tolerances to eliminate most "slop".
Metal stainless steel pivot balls at all suspension points increase durability and wear life for consistent handling.
Improved suspension geometry further reduces torque twist while allowing chassis fine-tuning.
Extended 13.9 inch wheelbase with longer frame rails and chassis supports a more realistic version of the Jeep® JT Gladiator body.
Detailed interior with molded driver adds to the vehicle's realistic scale looks.
New rear body mounts simplify body removal.
Injection-molded inner fenders hide internal components usually visible from the side of the chassis.
Spektrum™ DX3™ DSMR® radio is fully compatible with the Smart telemetry potential of the installed Firma™ Smart 40A ESC/receiver.
Included Spektrumâ„¢ 15kg metal gear servo and all electronics are protected by a waterproof design for confident driving in any weather and trail conditions.
Specifications
Final Drive Ratio 45.6:1 Low / 31.3:1 High
Motor Type Brushed
Rear Track 8.9 in (226mm)
Speed Control Included
Wheelbase 13.9" (353 mm)
Approximate Assembly Time No assembly required
Body 3-piece, highly detailed Lexan
Brakes Integral with ESC
Pinion 14T
Scale 1/10
Battery Sold Separately
Ground Clearance 3 in (76.2mm)
Product Length 22.25" (565 mm)
Spur Gear 40T
Suspension Multi-link solid axle with stainless steel pivot balls
Bushing Material Metal
Product Weight 7lbs (3175g)
Vehicle Type Rock Crawler
Water-Resistant Yes
Charger Sold Separately
Differential Locked
Max Battery Dimensions 5.45 x 1.83 x 1.38" (138.5 x 46.5 x 35mm)
Receiver Included
Shock Type Oil-filled
Ball Bearings Full set
Chassis Adjustable steel C-channel
Completion Level Ready-To-Run
Drivetrain 4WD
Drive Type Forward/Brake/Reverse
Product Height 9.5" (241 mm)
Front Track 8.9 in (226mm)
Product Width 9.25" (235 mm)
Radio Included
Technology Smart
Power Type Electric
Gear Pitch 32-Pitch
Whats In The Box
Axial® SCX10™ III Jeep® JT Gladiator 4WD
Spektrum Firmaâ„¢ Smart 40A ESC/Receiver (installed)
Spektrum 15kg Servo (installed)
Spektrum™ DX3™ DSMR® Radio
Product Manual
Required to Complete
Vehicle Battery (accepts standard and shorty packs)
Compatible charger
LiPo Safety Container
Product Code | C-AXI03006BT2 |
---|---|
Bundle Avaliable | Yes |
LiPo | No |
Pre Order | Yes |
Discontinued | No |
EAN / Barcode | 0605482159972 |
Brand | Axial |
Weight | 6.000000 |
Product Type | Electric Car |
skill levels | Novice |
Model Type | Rock Crawler |
RC Vehicle Type | RC Car Off Road |
Fuel Type | Brushless Motor |
Scale | 1:10 Scale |
Build Level | RTR Assembled |
Colour | Red |