This fantastic large EPP model is pushes the boundaries of foamie modelling to new heights. The distinctive paint finish gives it a presence that trully matches its size. The Extana is beautifully proportioned, although not a scale model it does give a nod design wise towards both the Extra & Katana.

The hollow EPP fuselage comes prebuilt, the wings & surfaces are all solid EPP. The wings remain removable even when the model is finished. What also sets this model apart from others of a similar size is that fact that it has 2 elevator servos allowing you to play with tailerons if you wish to push your flying that extra notch!

The space inside the fuselage is roomy & will take a wide range of equipment. Ideally for the best power to weight setup - you should be looking at batteries in the 3/4s 2500mah area, with a motor capable of giving you around 400w (or a little more).

Features:
* All EPP foam construction results in a robust, resilient airframe
* Generous 1.2m wingspan improves orientation and stability
* Extra large control surfaces
* Incredible control authority - can be flown extremely slowly
* Smooth pattern performance
* Ideal 3D trainer
* Quick build - typically 1-2 evenings

Specification
* Wingspan: 1250mm
* Length: 1260mm
* Flying Weight: 1230g - 1390g

Required To Complete
* Servos: 3 x 17g - Rudder/Ailerons, 2 x 11g - Elevator
* Motor: Brushless Outrunner around 400watts
* Battery: 3 or 4 cell Lipo 2500mah-3700mah

Please Note:
This model does NOT come with a manual but it is an easy build

More Information