An amazing machine with a striking colour scheme! Handles windy conditions well and with an A2217-9 brushless motor swinging an APC-E 10 x 4.7SF prop on a 1300mAh 3S (11.1V) LiPo battery, 3D unlimited flights are easily achieved. The huge control surfaces on this model enable extreme performance and provide exceptional authority.
Features:
* Full EPP construction
* Striking airbrushed colour scheme
* Extra large control surfaces
* Incredible control authority
* Smooth pattern performance
* Ideal 3D trainer
* Almost indestructible
* Builds in 1 to 2 evenings
* Composite landing gear
* Repairs easily with standard CA
Specification
* Wingspan 1010mm / 39.76in
* Length 1010mm / 39.76in
* Flying Weight 360-440g / 12.7-15.5oz
What's in the box:
* Pre-printed EPP airframe parts
* Hardware accessory pack
* Carbon fibre rod
* Light weight foam tyred wheels
* Carbon undercarriage
* Motor mount
Required:
* Motor: 100~200W brushless outrunner
* ESC: 20~30A (dependent on motor choice)
* Prop APC-E 10 x 4.7SF / 11 x 4.7SF (dependent on motor choice)
* Servos: 4 x 9~12g. Our recommendation: EMax ES08MA (stock no.406128)
* Y-lead (optional for ail servos)
* Battery: 650~1300mAh 3S (11.1V) LiPo
* Radio System: TX/RX min 4-channel
* Standard CA glue
Our recommended power sets:
Standard (195W): BL2215-25 brushless outrunner motor (stock no. 409483), 30A Pro ESC (stock no. 400214), APC-E 10 x 4.7SF (stock no. 411385)
Standard (225W): A2217-9 brushless outrunner motor (stock no. 409693), 30A Pro ESC (stock no. 400214), APC-E 10 x 4.7SF (stock no. 411385)
Light (175W): Hyperion zs2209-24, 20A ESC, APC-E 9 x 4.7SF prop, 600mAh 3S (11.1V) LiPo. Good quality 9g-12 servos are recommended for 3D but if a docile setup is required, cheaper 9g servos will do the job. With this light configuration you need to pay close attention to saving every gram posible. If you are not experienced in building foam type models such as this then please choose our performance power setup. If kept light this setup can prove very rewarding.
Performance (280W): Hyperion zs2213-18 (stock no. 409747), 25~30A ESC, APC-E 10 x 4.7SF prop, 1000~1200mAh 3S (11.1V) LiPo. Good quality high power metal gear servos are a must with this setup. Ideal for most modellers. The weight is less critical; this power set will get you out of trouble. This is a good good choice if learning to prop hang.
LiPo | No |
---|---|
Pre Order | No |
Bundle Avaliable | Yes |
Product Code | 401347 |
Discontinued | No |
EAN / Barcode | 9900000857196 |
Brand | RCFactory |
Weight | 6.000000 |
Product Type | Plane |
Model Type | 3D EPP Aerobats 1000mm |
Colour | Red |
Build Level | Kit Unassembled |
Fuel Type | No Motor Supplied |
RC Vehicle Type | RC Plane |
wing_span | 1001mm to 1500mm / 40in - 59in |