Team Associated RC10B6.4 AS90034

Champions by Design - 1:10 scale 2WD off road has been Team Associated's signature class since the release of the RC10 in 1984. The Team Associated RC10 buggy series has won 13 of the 18 I.F.M.A.R. World Championships contested, yet we never rest on our laurels. As tires, motors, batteries, and tracks evolve, Team Associated adapts and improves with every iteration of the RC10. With the RC10B6.4 project, engineers had the goals of improving jumping and landing, updating the steering feel to be "easy to drive fast," and making the buggy corner faster on high-grip carpet and clay.

Features
New 13mm big-bore threaded aluminum shocks and springs with machined shock pistons for improved bump and jump handling
New +3mm length aluminum chassis with 22.5 degree kick-up to complement updated front-end geometry and with new shape to reduce chassis scrub with the track surface
20deg., 22.5deg., and 25deg. molded bulkheads included for a complete range of caster and kickup options
New adjustable height steering bellcrank and rack system for optimized bumpsteer at all ride heights and caster angles
New -1mm kingpin offset steering and caster block set for smoother and more predictable steering through the entire wheel throw
New steel RC10B6.4 ESC mounting tray shifted forward in the chassis and with a wider footprint to fit electronics, resulting in a further forward weight bias
New front ballstud mount, top plate, and front wing mount to account for the kickup angle change
New chassis side rails with 3 optional fan mount locations to choose from depending on chassis length and transmission used
New cab-forward design RC10B6.4 bodyshell offered in standard (kit) and lightweight (optional) thickness
Front and rear anti-roll bars included
4mm carbon fiber front and rear shock towers with molded protective covers
Steel servo weight included for low CG and forward weight bias
Front and rear anti-roll bars included
4mm carbon fiber front and rear shock towers with molded protective covers
Aluminum servo mounting system with direct-to-chassis mounts and molded brace with transponder mounting location
Octalock spur gear and 11mm Octalock LCF pads
Wide pivot rear aluminum arm mounts for use with 73mm arms and 69mm CVA bones gives more predictable rear traction and an easy-to-drive rear-end feel. Also compatible with 75mm optional arms using the narrowest insert settings.
Symmetric rear arms with improved geometry and stiffness that can be flipped to allow a "split" for rear shock mounting position. Arms are available in 73mm and 75mm lengths (73mm included)
Rear hub assembly with modular vertical ball stud camber link mounts and axle height adjustments for precise roll center adjustments
Outer rear hinge pins captured with bolt head and locknut for increased durability
Rod end battery brace parts and hardware included in kit
Molded wire clips included for motor and ESC wires
+1 carbon fiber steering arms
Black steel LP serrated wheel nuts
69mm CVA bones for reduced bone plunge and minimized friction at drive pin
Clear body and clear wing included
Front wing mount and front wing included
5mm aluminum clamping wheel hexes
Fluid-filled gear differential
Adjustable differential height to allow drive shaft alignment through all ride height & axle height configurations
Shocks include X-rings for low friction assembly
Aluminum rear ballstud mount with three link positions for maximum adjustability and added strength
Lightweight aluminum one-piece top shaft and gear
Factory Team ball bearing set with 24 precision ball bearings, now oiled instead of greased for a more efficient drivetrain
Please Note items NOT included in kit: Reedy motor, battery, ESC, servo, receiver, wheels, tires, fan, and pinion gear. Assembly and painting required.

Specifications
Power Source: Electric
Terrain: Off-Road
Body Style: Buggy
Scale Size: 1:10 Scale
Assembly Level: Kit*
Length: 390mm (15.35in)
Width: varies
Wheelbase: varies
Weight: varies
Internal Gear Ratio: 2.60:1
Drive: 2WD

* This vehicle comes as a kit and must be fully assembled by the user. Electronics and/or an engine/motor may be required.

Required to complete
1:10 scale electric motor and electronic speed control
7.4V-7.6V 2S LiPo with "shorty" battery dimensions (standard or low-profile height)
Battery charger
2-channel surface transmitter, 2-channel receiver, and steering servo
Lexan(R) specific spray paint for body
1:10 scale off-road wheels and tires